White Polyethylene Double Coated Foam Tape 1mm with White Release Film

 

Product Introduction

 

White Polyethylene Double Coated Foam Tape is manufactured using polyethylene foam as the backing material, with pressure-sensitive adhesive applied to both sides of the foam. White release film is laminated onto the adhesive surface to protect the adhesive before application and during converting.

 

The 1mm PE foam backing gives White Polyethylene Double Coated Foam Tape a flexible and slightly compressible structure. Compared with a thin film-based adhesive, the foam carrier provides additional thickness that can accommodate minor differences between two surfaces.

 

The double-coated construction allows adhesive contact on both sides of the foam backing. After the white release film is removed, the exposed adhesive surface can be applied to the intended substrate. The second adhesive surface can then be used to bond the mating component.

 

White Polyethylene Double Coated Foam Tape can be produced with solvent-based or hot-melt pressure-sensitive adhesive. Adhesive selection should be based on the substrate, required tack, peel adhesion, holding power, temperature conditions and final assembly requirements.

 

 

Product Construction

 

 

The basic construction of White Polyethylene Double Coated Foam Tape consists of three functional elements: PE foam backing, adhesive coating and release film.

 

The PE foam backing provides thickness, flexibility and cushioning. The adhesive layers provide the bonding interface, while the white release film protects the adhesive before use.

 

The 1mm construction is suitable when a moderate foam thickness is required without creating an excessively thick bond line. The actual compression, cushioning and gap-filling behavior depends on foam density, adhesive formulation, applied pressure and the characteristics of the bonded surfaces.

 

White release film provides a clean and consistent protective layer. The white liner can also make the product easier to identify and handle during converting, slitting and manual application.

 

 

Product Parameters

 

Item	Specification
Product Name	White Polyethylene Double Coated Foam Tape
Backing Material	PE Foam
Product Thickness	1.0 mm
Foam Color	White
Adhesive	Solvent-based / Hot-melt pressure-sensitive adhesive
Release Film	White release film
Available Thickness	0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm
Standard Width	18 mm
Available Widths	10 / 12 / 15 / 18 / 20 / 24 / 25 / 30 / 36 / 40 / 48 / 50 / 60 mm
Other Lengths	10 m / 30 m / 50 m for selected specifications
Core Diameter	32 / 38 / 76 mm
Release Liner Colors	Red / Blue / Green / White
Compliance	RoHS available
Customization	Thickness, width, length, adhesive, liner and core

 

The specifications above cover common production configurations. White Polyethylene Double Coated Foam Tape can also be customized according to required dimensions and converting conditions.

 

 

Adhesive Performance

 

White Polyethylene Double Coated Foam Tape can be supplied with different adhesive systems to meet different bonding requirements. Solvent-based pressure-sensitive adhesive and hot-melt adhesive are available as production options.

 

For selected solvent adhesive constructions, typical reference values include tack of ≥8#, holding power of ≥12 hours, 180° peel strength of ≥20 N/25 mm, temperature resistance of approximately 90°C and tensile strength of approximately 20 N/25 mm.

 

For selected hot-melt adhesive constructions, typical reference values include tack of ≥18#, holding power of ≥3 hours, 180° peel strength of ≥6 N/25 mm, temperature resistance of approximately 60°C and tensile strength of approximately 10 N/25 mm.

 

These values are typical reference data rather than guaranteed performance for every White Polyethylene Double Coated Foam Tape specification. Actual results depend on adhesive formulation, foam construction, substrate, application pressure and testing conditions.

 

 

1mm PE Foam Backing

 

The 1mm polyethylene foam backing provides a balance between thickness and flexibility. The foam carrier can compress under pressure and conform to surfaces with minor irregularities.

 

White Polyethylene Double Coated Foam Tape 1mm can also provide a controlled adhesive interface between two components. The additional foam thickness can help accommodate small dimensional differences that may be difficult to manage with very thin adhesive films.

 

The PE foam structure contributes to cushioning and vibration absorption. When used between two components, the foam layer can reduce direct hard-surface contact and provide a softer interface.

 

The actual cushioning performance depends on foam density and compression. For applications requiring specific compression recovery or load-bearing performance, sample testing should be completed before production.

 

 

Key Features

 

Double Coated Adhesive Structure

White Polyethylene Double Coated Foam Tape has pressure-sensitive adhesive on both sides of the PE foam backing. The double-coated design provides two adhesive interfaces within one flexible tape construction.

 

1mm Moderate Thickness

The 1mm thickness provides a practical middle range for applications requiring more body than thin adhesive film while maintaining a relatively compact bond line.

 

White Appearance

The white PE foam backing and white release film provide a consistent light-colored appearance. White construction can be useful when the tape edge or backing may be visible around a finished component.

 

Flexible and Compressible

The polyethylene foam backing can deform slightly under pressure and conform to curved or uneven surfaces. The foam layer can also compensate for small surface gaps between mating components.

 

Multiple Adhesive Options

Solvent-based and hot-melt pressure-sensitive adhesive systems are available. Different adhesive choices allow White Polyethylene Double Coated Foam Tape to be configured according to the required balance of tack, adhesion and temperature resistance.

 

Convenient Release Film

The white release film protects the adhesive before application and supports easier handling during storage and converting. The release liner can be removed when the tape is ready for bonding.

 

Customizable Dimensions

White Polyethylene Double Coated Foam Tape can be slit into different widths and supplied in various roll lengths. Custom thicknesses, release liners and core sizes are also available for suitable production requirements.

 

 

Product Advantages

 

The main advantage of White Polyethylene Double Coated Foam Tape is the combination of a flexible foam carrier and adhesive coating on both sides. The construction provides bonding capability while adding thickness, cushioning and conformability.

 

The 1mm PE foam structure is also suitable when the finished assembly requires a small amount of gap compensation. Instead of relying on a completely rigid bond line, the foam carrier can accommodate minor differences in surface profile.

 

Another advantage is configuration flexibility. White Polyethylene Double Coated Foam Tape is not limited to one fixed width or roll length. Widths from 10mm to 60mm are available, with customized dimensions possible according to production requirements.

 

Different adhesive systems provide another level of flexibility. Solvent-based adhesive can be selected when stronger peel and holding characteristics are required, while hot-melt adhesive is available for applications requiring a different performance balance.

 

 

Surface Conformability

 

White Polyethylene Double Coated Foam Tape is designed with a flexible PE foam carrier that can follow gently curved surfaces and compensate for small irregularities.

 

The foam structure can improve contact across surfaces that are not completely flat. When pressure is applied during installation, the foam carrier can compress and conform to the surface profile.

 

Surface preparation remains important. Dust, oil, moisture and other contaminants can reduce the effective contact area between the adhesive and substrate.

 

For smooth metals, plastics, painted surfaces, glass and other common materials, adhesive compatibility should be confirmed through practical testing. Low-surface-energy materials may require a specially selected adhesive construction or additional surface treatment.

 

 

Cushioning and Gap Compensation

 

The PE foam backing provides a degree of cushioning between bonded components. The 1mm thickness creates a defined foam layer that can help reduce direct contact between surfaces.

 

White Polyethylene Double Coated Foam Tape can also compensate for minor gaps caused by surface unevenness, component tolerances or differences in material geometry.

 

The level of compression and recovery depends on the PE foam density and construction. White Polyethylene Double Coated Foam Tape should therefore be tested under the actual pressure, load and environmental conditions of the finished product when precise mechanical performance is required.

 

 

Typical Application Areas

 

White Polyethylene Double Coated Foam Tape can be used for fixing nameplates, decorative parts, furniture components, household products, display materials, signs and selected product accessories.

 

The flexible foam construction makes White Polyethylene Double Coated Foam Tape suitable for surfaces where a certain amount of conformability or gap compensation is needed.

 

The 1mm thickness can also be used when a moderate foam layer is preferred between two components. The foam layer provides a softer interface while the adhesive layers maintain contact with the selected substrates.

 

For products requiring customized tape geometry, White Polyethylene Double Coated Foam Tape can be slit into narrow rolls or converted into specific shapes. This allows the tape dimensions to follow the actual bonding area.

 

 

 

 

Available Sizes

 

White Polyethylene Double Coated Foam Tape is commonly available in 0.5mm, 1mm, 1.5mm, 2mm and 3mm thicknesses. 

 

The standard width is 18mm, while other available widths include 10mm, 12mm, 15mm, 20mm, 24mm, 25mm, 30mm, 36mm, 40mm, 48mm, 50mm and 60mm.

 

Standard short roll lengths include 2m and 5m. Selected specifications can also be supplied in 10m, 30m or 50m rolls. Core diameters of 32mm, 38mm and 76mm are available for different roll formats.

 

Release Film Options

 

White release film is the liner specified for this product configuration. The release film protects the adhesive during storage and handling while allowing the adhesive surface to remain clean before application.

 

For other White Polyethylene Double Coated Foam Tape configurations, red, blue, green and white release materials can be selected according to the product design and converting requirements.

 

Different liner options can help distinguish product specifications during production and simplify the handling of different tape grades.

 

 

Application Method

 

Before applying White Polyethylene Double Coated Foam Tape, clean the bonding surfaces thoroughly. Remove dust, oil, moisture and other contaminants that could interfere with adhesive contact.

 

Cut the required length of White Polyethylene Double Coated Foam Tape and position the tape carefully on the first substrate. Apply consistent pressure across the tape surface to improve contact between the adhesive and substrate.

 

Remove the white release film from the opposite side without unnecessarily touching the exposed adhesive. Position the second component accurately and apply suitable pressure over the bonding area.

 

For important applications, allow sufficient dwell time according to the selected adhesive system before applying significant load. Actual application conditions should be validated with samples before mass production.

 

Customization Service

 

GMARK can customize White Polyethylene Double Coated Foam Tape according to thickness, width, length, core diameter, adhesive system and release liner requirements.

 

The standard 1mm construction can be converted into narrow rolls for smaller bonding areas or wider rolls for larger surfaces. Custom dimensions can be discussed based on drawings, product samples or specific assembly requirements.

 

Customers can also request different PE foam colors, adhesive systems and release film colors for different product specifications.

 

For customized projects, useful information includes the required tape thickness, width, roll length, substrate material, estimated quantity and application environment. These details help determine the appropriate product construction.

 

Quality and Manufacturing

 

GMARK focuses on the manufacturing and converting of adhesive tape and foam-based adhesive products. Production can cover standard roll formats as well as customized widths, lengths and converting requirements.

 

White Polyethylene Double Coated Foam Tape is manufactured according to the confirmed product construction. Finished rolls can be checked for appearance, dimensions and relevant adhesive properties.

 

The technical values provided for adhesive performance are typical reference values. Final specifications should be confirmed according to the actual product construction and test results.

 

For new applications, sample evaluation is recommended before a larger production order. Testing the actual White Polyethylene Double Coated Foam Tape against the intended substrate can help confirm adhesion, handling and long-term suitability.

 

Why Choose GMARK

 

GMARK provides polyethylene foam tape products with flexible options for foam thickness, adhesive system, release material, width, length and core diameter.

 

For White Polyethylene Double Coated Foam Tape, GMARK can support standard specifications as well as customized converting requirements. Customers can select the appropriate construction according to the required bonding surface, tape dimensions and production process.

 

Sample evaluation and specification confirmation are recommended for applications with demanding adhesion, temperature or mechanical requirements.

 

 

Contact Us

Email: [email protected]

Phone: +86 18237680349

Send us your drawings, specifications, or application requirements, and our team will provide the most suitable double sided tape solution for your project.

 

                                                 WeChat                                                                       WhatsApp